PRM8-06 Proportional Directional Control Valve, Pilot Operated

• Pilot operated proportional control valve with exceptional hydraulic power limits
• Subplate mounting surface acc. to ISO 4401, DIN 24340 (CETOP 03) standards
• The valve opening and resulting flow rate can be modulated continuously in proportion to the reference signal
• The valve can be controlled directly by a current control supply unit or by a electronic control unit to exploit the valve performance to the fullest
• Analog converter card EL3E allows fine position control of the valve spool, reducing hysteresis and response time and optimizing the performance of the valve
• Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
• Wide range of electrical terminal versions for the solenoids available
• Wide range of interchangeable spools and manual overrides available
• The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
• In the standard version, the valve housing is phosphated and steel parts zinc-coated for 240 h salt spray protection acc. to ISO 9227
• Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)

Specifications:

PRM9-10 Proportional Directional Control Valve, with Digital Onboard Electronics and Internal Feedback

• Direct acting proportional control valve with integrated digital onboard electronics (OBE), proportional control, spool and process feedback
• Control valve with subplate mounting surface acc. to ISO 4401, DIN 24340 (CETOP 05) standardsThe valve opening and resulting flow rate can be modulated continuously in proportion to the reference signal
• Digital electronics allows fine control of the valve spool position, reducing hysteresis and response time and optimizing the performance of the valve
• Used for e.g. position and speed control of hydraulic actuators
• Wide range of interchangeable spools available
• The settings of electronics can individually be adjusted by a parametrization software
• Easy to connect via USB ⇔ Micro-USB ports
• Optical feedback of valve status through three LEDs
• The valve is zinc-coated with the enhanced surface corrosion protection 520 h in NSS acc. to ISO 9227
• High hydraulic power limits and smooth running characteristic
• Improved shock and vibration behaviour
• CANopen connectivity

Specifications:

PVRM3-103 Proportional Pressure Control Valve, Reducing - Relieving, Direct-Acting

• Excellent stability throughout flow range with rapid response to proportional current input change
• Low hysteresis, accurate pressure control and low pressure drop through CFD optimized flow paths
• Precise pressure control vs current and excellent repeatability
• Integrated relief function for protection against pressure peaks
• Solenoid electrical terminal AMP Junior Timer, or Deutsch D04-2P
• 12 or 24 V DC coils
• In the standard version, the valve is zinc-coated for 240 h protection acc. to ISO 9227

Specifications:

SD2P-B4 4/3 Proportional Directional Control Valve, Screw-in Cartridge design

• Proportional valve with integrated hydraulic lock control function
• Hardened and precision working parts
• 12 and 24 VDC standard supply voltage of coils
• Optional type of electrical terminal EN175301-803-A, AMP Junior Timer or Deutsch DT04-2P
• Optional Built-in quenching diode for protection of electronic control unit
• Economical design
• Connector positioning thanks to coil rotation around its axes 360°
• In the standard configuration steel parts are zinc coated for 240 h protection in NSS acc. to ISO 9227

Specifications:

RNEH5-16 4/2 and 4/3 Directional Control Valve, Pilot Operated

• Directional control valve, internally or externally pilot operated with mounting interface acc. to ISO 4401, DIN 24340 (CETOP 08)
• Driven by an ISO 4401-03 (CETOP 03) solenoid operated directional valve (RNEH) or a hydraulic pilot operated directional valve (RNH)
• Electrohydraulic and hydraulic control ports X and Y
• Version for high pressures 420 bar (6090 PSI) available
• High transmitted hydraulic power, optimized design to minimize the pressure drop
• Flexibly changed from internal pilot or drain to external by inserting or removing threaded plugs in the main control valve body
• Wide range of interchangeable spools and valve controls available
• Soft-shift, spool speed, main stroke limiter control options
• In the standard version the valve body is phosphated and operating solenoids are zinc coated for 240 h corrosion protection in NSS acc. to ISO 9227
• Enhanced surface protection for mobile sector for up to 520h salt spray acc to ISO 9227

Specifications:

RPE3-06 4/2 and 4/3 Directional Control Valve, Solenoid Operated

• Direct acting, directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 03)
• High transmitted hydraulic power up to 350 bar with optimized design to minimize pressure drop
• Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
• The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
• Wide range of solenoid electrical terminal versions available
• Wide range of interchangeable spools and manual overrides available
• CSA Certificate upon request
• Inductive contactless Normally Open and Normally Closed spool position sensor option
• Soft-shift spool speed control option
• The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
• In the standard version, the valve housing is phosphated. The steel parts are zinc coated (240 h corrosion protection in NSS acc. to ISO 9227)
• With optional increased surface corrosion protection of the whole valve 520 h in NSS, e.g. for mobile applications

Specifications:

RPE4-10 4/2 and 4/3 Directional Control Valve, Solenoid Operated

• Direct acting directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 03)
• High transmitted hydraulic power up to 350 bar with optimized design to minimize pressure drop
• Five chamber housing design with reduced hydraulic power dependence on fluid viscosity
• The valve is available with interchangeable DC solenoids, also for AC power supply using a built-in rectifier bridge
• Wide range of solenoid electrical terminal versions available
• Wide range of interchangeable spools and manual overrides available
• CSA Certificate upon request
• Inductive contactless Normally Open and Normally Closed spool position sensor option
• Soft-shift spool speed control option
• The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
• In the standard version, the valve housing is phosphated and steel parts zinc-coated for 240 h salt spray protection acc. to ISO 9227
• Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)

Specifications:

RPEK1-03 4/2 and 4/3 Directional Control Valve, Solenoid Operated, Bankable

• Direct-acting, directional control valve with bankable mounting interface
• Designed to be assembled in series or parallel, mounting up to 8 body modules
• High transmitted hydraulic power up to 250 bar, optimized design to minimize the pressure drop
• Housing with three chambers for production cost savings
• The valve is available with interchangeable DC solenoids
• Wide range of solenoid electrical terminal versions available
• Wide range of interchangeable spools and manual overrides available
• Suitable for compact applications in the mobile and mini-power pack industries
• Space and cost saving! With optional end valves
• No need for bar manifold to construct complex circuit assemblies from stock
• In the standard version, the valve housing is phosphated and steel parts are zinc-coated for 240 h protection acc. to ISO 9227
• Enhanced surface protection for mobile sector up to 520h salt spray acc to ISO 9227 available

Specifications:

RPER3-06 Auxiliary Lever Override for Solenoid Operated Valves

• Auxiliary lever overrides for ON-OFF solenoid valves of the type RPE3-06 (Datasheet No. 4010) with Size 06 and mounting interface acc. to ISO 4401, DIN 24340 (CETOP 03)
• Auxiliary lever operators allow the valve to be operated when electrical system is de-energized, e.g. emergency operation, electrical failures, maintenance activities
• For proportional valves please consult our technical department for their identification and feasibility
• Manual lever and actuation element can be rotated in 90° increments for flexible installation
• When the valve is electrically operated the hand lever remains stopped in its neutral position
• The lever override does not affect the performances of the base valve
• In the standard version, the valve housings are phosphated and the steel parts are zinc-coated for 240 h salt spray protection acc. to ISO 9227
• Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)

Specifications:

RPR3-06 4/2 and 4/3 Directional Control Valve, Manually Operated

• Direct acting manually operated directional control valve with subplate mounting interface acc. to ISO 4401, DIN 24340 (CETOP 03)
• High transmitted hydraulic power up to 350 bar, optimized design for minimized pressure drop
• Three chamber housing design for production cost saving
• Manual lever and actuation element can be rotated in 90° increments for flexible installation
• Wide range of interchangeable spools available
• Springless, detented valves available, valve holds last selected position, available for all spools
• In the standard version, the valve housing is phosphated and steel parts zinc-coated for 240 h salt spray protection acc. to ISO 9227
• Enhanced surface protection for mobile sector available (ISO 9227, 520 h salt spray)

Specifications: